CP1E-N40S1DR-A USER'S MANUAL (Communications Commands)

Model: C200H-OC221.
No. of points: 8 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Resistance Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: Pt100, JPt100 CP1E-N40S1DR-A USER'S MANUAL.
Conversion speed (resolution):
100 ms/4 inputs.
Externa connection: Removable erminal block CP1E-N40S1DR-A
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value CP1E-N40S1DR-A USER'S MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CP1E-N40S1DR-A USER'S MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Model : CV1000-CPU01-V1.
SFC / Ladder 1, 024 points (with RAM62K words, the top internal link).Model: CPM2C-20C1DT1M-D. CPU Unit: Units with 20 I/O points.
2 MIIL connectors CP1E-N40S1DR-A Manual.
Inputs: 12 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: Yes.Model: C500-CN531.
Cable length: 50 m.
Programming Console Connecting Cable.
For extension and cconnection of FIT of FIT CP1E-N40S1DR-A Manual.
Model: CPM2A-40CDR-A. Power supply: AC power supply.
Output type: Relay.
Inputs points: 24 points.
Outputs points: 16 points.