CP1E-NA20DR-A USER'S MANUAL (Communications Commands)

Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1E-NA20DR-A USER'S MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-NA20DR-A
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit classification: CJ1 Special I/O Units CP1E-NA20DR-A USER'S MANUAL.
Product name: Temperature Control Units.
Specifications; No. of loops: 4 loops;
Temperature sensor inputs: Platinum ,
resistance thermometer input(JPt100, Pt100);
Control outputs: Open collector NPN outputs (pulses).
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers CP1E-NA20DR-A USER'S MANUAL.
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output. Model: CPM2C-10CDT1M-D. CPU Unit: Units with 10 I/O points.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Model: C200H-IA122.
No. of inputs: 16 pts.
Input voltage: 100 to 120 VAC, +10%/–15%.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tioNumber of inputs: 32 pts.
Input Voltage: 24V DC. CP1E-NA20DR-A Manual.
Input Current: 6 mA.Name: Remote I/O Master.
Model: C200HW-SRM21-V1.Name: RS-422A Converter.
Specifications:
Converts RS-233C to RS-422A/RS-485.
Standards: UC1, N, L, CE.
The RS-232C port of the SYSMAC series,
can be chaanged into RS-422A/485 port CP1E-NA20DR-A Manual.
The CJ1W-CIF11 RS-422A Converter connects,
directly to a CS/CJ-series RS-232C port and,
converts RS-232C to RS-422A/485.