ZW-XRS2 Communications User's Manual ((RS-232C))

Item: Base Set (For ZR-RX45).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 0.9A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1.5 s.
Ion balance: ±10V max ZW-XRS2 Communications User's Manual.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet) ZW-XRS2
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max ZW-XRS2 Communications User's Manual.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing).
Weight (Packaged): Approx. 0.6 kg (Approx. 1.2 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, L-mounting bracket, Streamer ZW-XRS2 Communications User's Manual.
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues. Item: Parallel cable for ZW-CE1@T 32-pole,
(included with Controller ZW-CE1@T).
Cable length: 2m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects.
This principle is described below. Optical system: Diffuse reflective.
Beam shape: Line beam.
Sensing distance: 100±40 mm.
Resolution: 16 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Shape: Cylindrical.
Dimensions: 5.4 dia. x 18 mm.
Sensing distance: 1 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiiece Displacement ZW-XRS2 Manual.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZW-XRS2 Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit.