ZX-TDS10T User's Manual ()

Type: Side-view lens.
Spot: Spot dia.: 3 mm.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs ZX-TDS10T User's Manual.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system ZX-TDS10T
Equipped with a color LCD that makes settings simple and reliable. Optical system: diffuse type.
Detection distance: 200 positive and negative 50mm.
Beam shape: linear beam.
Beam diameter: 900mm * 100 m.
Resolution: 5 m.
Cable length: 2m. Connection method: Pre-wired ZX-TDS10T User's Manual.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Optical system: Diffuse reflective ZX-TDS10T User's Manual.
Beam shape: Spot beam.
Sensing distance: 300±200 mm.
Resolution: 300 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Type: Line beam lens.
Spot: Beam width: 15 mm.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system.
Equipped with a color LCD that makes settings simple and reliable. For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Shape: Cylindrical.
Dimensions: 8 dia. x 22 mm.
Sensing distance: 2 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiecce Displacement ZX-TDS10T Manual.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).

Easily perform calculation for two Sensors by using a Calculating Unit ZX-TDS10T Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit.