CJ1G-CPU45P PROGRAMMING MANUAL ()

Model: C200H-BC101-V2.
No. of I/O slots: 10 slots.Product name: Pulse I/O Module.
Specifications: Sinking outputs, MIL connector,
10 inputs (including four interrupt/quickresponse ,
inputs and two high-speed counter inputs)6 outputs ,
(including two pulse outputs and two PWM outputs).
Current consumption (A): 5V, 0 CJ1G-CPU45P PROGRAMMING MANUAL. 08; 24V,--.
Standards: UC1, N, L,CE.
CJ2M for basic machine automation CJ1G-CPU45P
The CJ2M Series is ideal for packaging and general.
machine automation needs. Connectivity is assured.
thanks to the built-in USB port and the choice of.
Ethernet and RS-232C/422/485 interfaces on the CPU.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs CJ1G-CPU45P PROGRAMMING MANUAL.
Signal range selection:
Set separately for each input.
I/O type: B, E, J, K, L, N, R, S,
T, U, WRe5-26, PLII, ±100 mV.
Conversion speed: 20 ms/4 inputs,
10 ms/2 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 26V, 0.08A.
Standards: UC1, N, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CJ1G-CPU45P PROGRAMMING MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spaace compared,
with previous systems CJ1G-CPU45P Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ1G-CPU45P Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.