CJ1H-CPU67H INSTRUCTIONS REFERENCE MANUAL ()

For C200H-PRO27-E Hand-held Programming Console ming Console.
2m.I/O Cable (for I/O to Interface Racks) 30 m (L) CV500-CN322Model: C500-BC082(3G2A5-BC082).
8 slots(5 linkable slots).
Model: C200H-B7A22.
I/O points: 32 output points and 32 input points or 30 input points + 2 error
inputs.
Weight: 300g max CJ1H-CPU67H INSTRUCTIONS REFERENCE MANUAL. 100 to 120/200 to 240 VAC (switchable), Wired.Power supply: DC power supply CJ1H-CPU67H
Output method: Transistor output source type.
Inputs points: 18 points.
Outputs points: 12 points.Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CJ1H-CPU67H INSTRUCTIONS REFERENCE MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CJ1H-CPU67H INSTRUCTIONS REFERENCE MANUAL. C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT201.
Master station unit remote I/O.C500-GP Special I/O Unit GPIB Interface Unit C500-GPI01.CV500-CN Cable Motion Control Connecting Cables 6 m CV500-CN624Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA; 1/4,00.
Conversion period: 1 ms/point.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.3% of F.S. Current: ±0.5% of F.S.
External connection: Removable terminal block.
External power supply: 244 VDC +10% -15%, 200mA max CJ1H-CPU67H Manual.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 24V, 0.2*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Anallog Input Units for converting analog input,
signals into binary data CJ1H-CPU67H Manual.
Analog Output Units for converting binary ,
data into analog output signals.