CJ1H-CPU67H PROGRAMMING MANUAL ()

C500-OD I/O Unit Transistor Output 16 pts C500-OD219.
DC12-24V 2.1A.Model: C200H-OC222N.
No. of points: 12 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads).Connecting I/O control module and interface module.
Cable length: 0.7 m.Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector CJ1H-CPU67H PROGRAMMING MANUAL.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor CJ1H-CPU67HModel: C500-CN131.
Cable length: 10 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.
C500-OC I/O Unit Transistor Output 16 pts C500-OC223-E(3G2A5-OC223-E).
AC250/DC24V 2A.Model: CPM2C-32CDT1M-D. CPU Unit: Units with 32 I/O points.
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 16 outputs CJ1H-CPU67H PROGRAMMING MANUAL.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.C500-ID Special I/O Unit ID Sensor Unit Long-distance C500-IDS02-V1.Name: Three-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CJ1H-CPU67H PROGRAMMING MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CJ1 Basic I/O Units.
Product name: Quick-response Input Unit.
Specifications: I/O points, 16 inputs;
Input voltage current, 24VDC, 7mA;
Commons: 16 points, 1 common;
Input pulse widt conditions, ON time:
0 CJ1H-CPU67H Manual. 05 ms max. OFF time: 0.5 ms max;
Max. Units mountable per Unit, 2;
External connection, Removable terminal block.
No. of words allocated: 1 word.
Current consumption: 5V, 0.08A; 24V, --.
Standards: UC1, N, L, CEE CJ1H-CPU67H Manual.
Capture Input Signals Shorter,
Than the Cycle Time.
This Input Unit can read pulse inputs that,
are shorter than the cycle time of the CPU Unit.