CJ2M-CPU32 REFERENCE MANUAL (Communications Commands)

Product: DeviceNet Unit.
Specifications: For CS Series,
Functions as either a master or a slave.
2,048 I/O points.
Standards: UC1, N, L, CE.
A DeviceNet Unit for the CS Series.
That Boasts Industry-leading.
Performance and Functions. Power supply: AC power supply.
Output method: Relay output CJ2M-CPU32 REFERENCE MANUAL.
Inputs points: 18 points.
Outputs points: 12 points.C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK11 CJ2M-CPU32100 to 120/200 to 240 VAC (Supports SYSMAC LINK and SYSMAC NET Link Systems.)Power supply: DC power supply.
Output method: Transistor output source type.
Inputs points: 6 points.
Outputs points: 4 points.C500-ID I/O Unit TTL Input Unit 32 pts C500-ID501CN(3G2A5-ID501CN).
DC5V 3.5mA.Unit type: CJ1 CPU Bus Units CJ2M-CPU32 REFERENCE MANUAL.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming;
No. of axes: 2 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency CJ2M-CPU32 REFERENCE MANUAL.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control.
A wide range of position control,
functions are available with,
this position control unit.
I/O capacity/Mountable Units(Expansion Racks): 2, 560 points/40 Units (3 Expansion Racks max.).
Program capacity: 60K steps.
CJ1H-CPU65H CPU Data memory capacity: 128K words(DM: 32K words, EM: 32K words × 1 bank).
LD instructionC500-RM SYSMAC BUS Remote I/O Master Wired C500-RM001-PV1.
APF/PCF.Model : CV500-TDL21.
You can connect up to 64 at a temperature controller using two communication ports..I/O Interface UnitUnit type: CJ1 CPU Bus Units.
Product Name: Serial Communications,
Units High-speed type.
Specifications:Communications Interface,
2 RS-422A/485 ports; Communications functions,
The following functions can be selected,
for each port with an CJ system:
Protocol macro, Host Link, NT Links (1:N mode),
Serial Gateway, No-protocol, Modbus-RTU Slave,
The following functions can be selected,
for each port with an NJ system: Protocol macro,
Serial Gateway, No-protocol, Modbus-RTU Slave.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.40A; 224V,-- CJ2M-CPU32 Manual.
Standards: UC1, N, L, CE.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485,, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol CJ2M-CPU32 Manual.