CRT1-MD16TA-1 UL Standards and CSA Standards ()

C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC222-EC200H A Backplane I/O Mounting Bracket For 3 Slots C200H-ATT33.CV500-BS CPU Bus Unit BASIC Unit CV500-BSC11.
RS-232C: 2 ports, RS-422: 1 port.Unit type: CS1 Special I/O Units.
Product name: Isolated-type Resistance,
Thermometer Input Units (Ni508 CRT1-MD16TA-1 UL Standards and CSA Standards. 4 Ω).
points Input: 4 inputs CRT1-MD16TA-1
Signal range selection:
Set separately for each input.
I/O type: INi508.4.
Conversion speed (resolution):
100 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CRT1-MD16TA-1 UL Standards and CSA Standards.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them CRT1-MD16TA-1 UL Standards and CSA Standards.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. C200H A Backplane I/O Mounting Bracket For 8 Slots C200H-ATT83.Name: Compact Connectors.
Specifications: Inputs/Outputs; 2 input/2 output; NPN.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit CRT1-MD16TA-1 Manual.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cabless which can be easily purchased at a lower price CRT1-MD16TA-1 Manual.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications.