D4N-8262 INSTRUCTION sheet ()

Actuator: Plunger.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 1NC/1NO(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available D4N-8262 INSTRUCTION sheet. )
M12-connector models are also available, saving on labor and,
simplifying replacement D4N-8262
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. High Reliability for Micro Load,
Applications, Even in Adverse,
Atmospheres (Dust, High Humidity, Silicon Gas, etc D4N-8262 INSTRUCTION sheet. )
The reed switch offers exceptional contact.
reliability in micro load applications.
Same mounting pitch as for the V Miniature Basic Switch.
High durability with a bounce time of 1 ms max. Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Center roller lever.
Cable length : 3 m.
Compact Limit Switch That''s Also D4N-8262 INSTRUCTION sheet.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cablees with CE marking D4N-8262 Manual.
(Applicable only to standard models.)Door Interlock Power.
Switch with Minimum.
Contact gap of 3 mm.
Offers the minimum contact gap of 3 mm required.
for power switches as standard equipment.
Safety considerrations include a double return spring,
and direct drive positive contact opening feature D4N-8262 Manual.
Pull-on lock model for easy maintenance is also available.