D4N-9E26 INSTRUCTION sheet ()

Release key type: general type (metal).
Connection mode: connector.
The solenoid voltage / indicator type: DC24V/ orange.
Lock / release mode: mechanical lock / electromagnetic release.
Contact composition (door open and close detection switch + lock control switch):6 contacts (2NC/1NO + 2NC/1NO) D4N-9E26 INSTRUCTION sheet.
Conduit size: G1/2.
6 contact electromagnetic lock safety door switch world minimum level D4N-9E26
Small electromagnetic lock safety door switch D4SL-N.
A touch of the 2 wiring way, can reduce the working hours.
Built in a variety of types of switches, applicable to all types of devices (you can choose 4 contacts, 5 contacts, 6 contacts).
Lock strength for a reassuring 1300N.
The insertion direction of the key can be changed without taking down the head D4N-9E26 INSTRUCTION sheet.
Significantly reduce the solenoid current helps to reduce the cost of the power supply.
The sliding key unit of D4SL-NSK10-LK.
Using the lock key can prevent the locked in the dangerous area of the fence.
D4SL-N can be easily mounted on the side of 40mm aluminum frame.
Material for resin, the most suitable light weight door. Ratings: Standard load; 0 D4N-9E26 INSTRUCTION sheet. 1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Crossroller plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
CCable lengths of 3 and 5 m available on standard models D4N-9E26 Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation D4N-9E26 Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)