E2E-C05S01-WC-C1 INSTRUCTION sheet ()

Name: Small reflector.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 95%.
Degree of protection: IEC IP67.
Accessories: Mounting Brackets E39-L104 (with screws) E2E-C05S01-WC-C1 INSTRUCTION sheet. Sensor type: Diffuse-reflective E2E-C05S01-WC-C1
Sensing distance: 100 mm.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability E2E-C05S01-WC-C1 INSTRUCTION sheet.
High EMC protection.
High light immunity.
Robust and waterproof housing. Size: M12 (Brass); Double; Unshielded.
Sensing distance: 8 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Fitting materials: Iron, zinc plating.
Count: 2.
Accessories: Description, Phillips screws M3 × 14,
(with spring washers) Plain washer M3;
Material, Iron, zinc plating; Count, 4 E2E-C05S01-WC-C1 INSTRUCTION sheet.
Applicable sensor (mounting pitch on sensor side): E3C-1 (10).
Page: Dimensions, 5. Sensing method: Grooved-type.
Sensing distance : 30 mm .
A Grooved-type Sensor That Doesn''t
Require Optical Axes AlignmentNew 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temmperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV E2E-C05S01-WC-C1 Manual.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colorrs E2E-C05S01-WC-C1 Manual.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs.