E3X-DA21F-S INSTRUCTION sheet ()

E32-L25 type: special light beam type; limited reflection,
Features: small difference; high side function,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsSize: 48 x 96mm.
Control output 1: voltage output (SSR driver).
Control output 2: voltage output (SSR driver) E3X-DA21F-S INSTRUCTION sheet.
Auxiliary output: 4 points (auxiliary output 2, 1 common, auxiliary output 3, 4 public general) E3X-DA21F-S
Power supply voltage: AC/DC24V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 1 points.
Communication: -.
Event input: 6 points.
Remote SP input: there.
Transfer output: have E3X-DA21F-S INSTRUCTION sheet.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply E3X-DA21F-S INSTRUCTION sheet.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the component communication.
A new type of proportional control allows you to control the valve. Sensing method: Through-beam type.
Output type: NPN output.
Output configuration: Dark-ON or Light-ON (selectable).
Cable length: 1 m.
Liquid LLevel Photomicrosensor with,
operation mode and sensitivity selectors,
for easy application E3X-DA21F-S Manual.
Operation mode selector allows modes to be switched easily.
Sensitivity selector is suitable for any 6- to 13-mm-diameter transparentt or,
semi-transparent pipe with a wall thickness of 1 mm E3X-DA21F-S Manual.
Uses a clean (with no powder parting agent) cable.
Operating voltage range: 12 to 24 VDC.