E5EC-QX2DSM-012 INSTRUCTION Manual ()

Setting: simulation settings.
Indication mode: no indication.
Adjustment mode: ON/OFF action.
Output: relay.
Input: thermocouple J.
The size of the DIN48 to achieve the simulation set, low cost.
The most small and realize the low cost of.
Proportional (P) action in the regulation mode.
And the reset function is added E5EC-QX2DSM-012 INSTRUCTION Manual.
Through the installation of the adapter can be continuously close E5EC-QX2DSM-012
The installation of DIN guide rail and panel mounting can be carried out by means of insertion. Size: 96 x 96mm.
Control output 1: relay output.
Control output 2:--.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input E5EC-QX2DSM-012 INSTRUCTION Manual.
Heating wire break, SSR fault detection function: -.
Communication: -.
Event input: -.
Remote SP input: -.
Transfer output: -.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports E5EC-QX2DSM-012 INSTRUCTION Manual.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the component communication E5EC-QX2DSM-012 Manual.
A new type of proportional control allows you to control the valve. Appearance: Unshielded, M18.
Sensing distance: 14 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tigghtening strength E5EC-QX2DSM-012 Manual. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.