G3J-205BL INSTRUCTION MANUAL ()

Terminal (Wire connection): Screw terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC, 200V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel G3J-205BL INSTRUCTION MANUAL.
Realized opening and closing ability with one pole 6 A slim shape G3J-205BL
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs G3J-205BL INSTRUCTION MANUAL.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Classification: Built-in diode model.
PCB terminals.
Highly Reliable, 4-pole Miniature Relay Ideal,
for Sequence Control.
Card lift-off employed for greater life and stable quality.
Long endurance and stable quality are assured by card lift-off system.
Mounting interchangeability with MY-series Relays G3J-205BL INSTRUCTION MANUAL.
Operation indicator mechanism incorporated for at-a-glance,
monitoring of ON/OFF operation. In addition, a built-in operation,
indicator model is also included in this Relay Series. Isolation: Phototriac.
Zero cross function: No.
Indicator: No.
Rated output load: 20 A at 100 to 240 VAC.
Rated input voltage(See note 1, 2.): 5VDC, 12VDC, 24VDC.
Compact, Low-cost, SSR Switching 5 to 20 A.
Wide load voltage range: 75 to 264 VAC. Both 100-V and,
200-V loads can be handled with the same model.
Dedicated, compact aluminum PCB and power elements used.
Built-in varistor effectively absorbs external surges.

Quick-connect #110 input terminals and #250 output,
connections G3J-205BL Manual. (#187 input terminals and #250 output,
connections are available.).
“-US” models certified by UL, CSA, and IEC/EN (TÜV). Cable with connector (1 to 1) /G79-_C.
L ssize: 1000mm G3J-205BL Manual.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable.