G3J-T403BL INSTRUCTION MANUAL ()

Easy-to-use, Space-saving Terminal Relay with Four-point Output.
Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D).
Each terminal circuit (with coil or contact) is independent from one another.
Short Bar ensures easy connection of common and adjacent terminals.
Provided with a terminal cover that prevents electric-shock ac cidents G3J-T403BL INSTRUCTION MANUAL.
Relay and MOS FET relay models are available G3J-T403BL
LED operation indicator.
Built-in diode absorbs coil surge.
Mounts either on DIN track or screws.
Tool for easy mounting or removal of Relays provided.
UL, CSA, and VDE certification for standard models (VDE: G6D-F4B only). Refer to Safety Precautions for All Solid State Relays.
AC Input Unit Enabling AC Operation G3J-T403BL INSTRUCTION MANUAL.
Connects to a maximum of two G3PA-VD Relays. Safety outputs *3: Instantaneous, 2(Semiconductor);
OFF-delayed*2, 2 (Semiconductor).
Auxiliary outputs *4: 2(Semiconductor).
Logical AND connection: Inputs, 2(Semiconductor); Outputs, 2(Semiconductor).
No. of input channels: 1 or 2 channels.
Max. OFF-delay time *1: 150 s.
Rated voltage: 24 VDC.
Terminal block type: Screw terminals G3J-T403BL INSTRUCTION MANUAL.
Logical AND Function Adds Flexibility to I/O Expansion.
Facilitates partial or complete control system setup.
Solid-state outputs (excluding Expansion Units).
Detailed LED indications enable easy diagnosis.
TÜV SÜD certification for compliance,
with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
Approved by UL and CSA.
New unit joins the Series with the following two additional features:
-OFF-delay time of up to 150 seconds can be set.
-Two logical AND connection inputs. High-power, Load-control SSRs with.
High Current of 75 or 150 A and High.
Voltage of 240 or 480 VAC.
RoHS compliant.
Models also available with no zero cross.
Replaceable power elements.
Conforms to cULus standards and EN standards (TÜV certification). Insulation method: Photocoupler.
Operation indicator: Yees (yellow) G3J-T403BL Manual.
Zero cross function: Yes.
Applicable output load: 75 A, 100 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
High-power, Load-control SSRs with.
High Current of 75 or 150 A and High.
Voltage of 240 or 480 VAC.
RoHSS compliant G3J-T403BL Manual.
Models also available with no zero cross.
Replaceable power elements.
Conforms to cULus standards and EN standards (TÜV certification).