CP1E-N40SDR-A PDF datasheet (datasheet)

C500-NC Special I/O Unit Position Control For pulse motors 1 axis C500-NC113.Unit classification: CJ1 Special I/O Units.
Product name: Isolated type DC Input Units.
Input points: 2 inputs.
Signal range selection: DC voltage:
0 to 1.25 V, -1.25 to 1.25 V, 0 to 5 V,
1 to 5 V, -5 to 5 V, 0 to 10 V, -10 to 10 V,
±10 V selectable range DC current:
0 to 20 mA, 4 to 20 mA CP1E-N40SDR-A PDF datasheet CP1E-N40SDR-A
Conversion speed (resolution): Conversion,
speed: 10 ms/2 inputs, Resolution: 1/64,000.
Accuracy at ambient temperature of 25°C:
Accuracy: (±0.05% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 24V, 0.09A.
Standards: UC1, CE CP1E-N40SDR-A PDF datasheet.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V).
A Unit supports four input channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage).
All inputs are isolated. High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources CP1E-N40SDR-A PDF datasheet.

Name: High-speed Counter Module.
Model: C200H-CT002.
Number of axes: 1 axis/Unit.
Operating modes: 6.Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.Model: C200H-ID217.
No. of points: 32 pts.
Specifications: 24 VDC.
Weight: 250g max.ASCII Unit
This program runs independently from the ladder-diagram program in the PLC CP1E-N40SDR-A PDF catalog.

Name: ASCII Module.
Model: C200H-ASC21.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2: RS-422A/4885(peripheral A memory card suitable for Phoenix PCM+3 CP1E-N40SDR-A PDF catalog. 2 and one of thefollowing Bus Connection Units is required. No PC card is provided with the Unit.