C200H-LK201-V1 SETUP MANUAL ()

C200H-CPU01-E/C200H-CPU03-E CPUs
High Spec, Small Rack Style,
OEM Version The C200H-CPU01-E and C200H-CPU03-E controllers offer big machine functions in a system designed ideally for basic OEM systems from 50 to 480 I/O.
A wide variety of plug-in style I/O modules are available,
including intelligent modules C200H-LK201-V1 SETUP MANUAL. Unit type: CS-series Special I/O Units.
Product name: Analog Input Units C200H-LK201-V1
Specifications: I/O points, 4 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max.
(Settable to 1 ms/point).
Externa connection, Removable terminal block C200H-LK201-V1 SETUP MANUAL.
Current consumption: 5V, 0.12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Connects to right-hand side of CPU block.Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (NPN) output, 2 loops C200H-LK201-V1 SETUP MANUAL. Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helpps to detect errors on site C200H-LK201-V1 Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Connection type: Screw - Screw.
Description: Conttroller link repeater unit (wire to wire) C200H-LK201-V1 Manual. Specification: Thermocouple input (J/K),
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.