C500-LK203 PROGRAMMING MANUAL ()

Model: C200HW-COM05-V1.
Specifications: Two RS-232C ports and a protocol macro function.Model: C200H-MD501.
No. of I/O pts: 16 inputs, 16 outputs.
Specifications: 5 VDC.Output method: Transistor sinking.
Inputs: ---.
Outputs: 8.Model: C500-COV02.
Connector on the C500 link unit for the base unitName: Three-tier Screw Terminal Block C500-LK203 PROGRAMMING MANUAL.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection C500-LK203
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction C500-LK203 PROGRAMMING MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: Host Link Module.
Model: C200H-LK201-V1.
Communication ports: 1 RS-232C, 25 pin female.Unit type: CJ1 Special I/O Units C500-LK203 PROGRAMMING MANUAL.
Product name: Analog Input Unit.
I/O points: 4 inputs;
Signal range selection: Set separately for each input.
Signal range; Resolution: 1 to 5 V (1/10,000),
0 to 10 V (1/20,000), -5 to 5 V (1/20,000),
-10 to 10 V (1/40,000), and 4 to 20 mA (1/10,000).
Conversion period: 20 μs/1 point, 25 μs/2 points,
30 μs/3 points, 35 μs/4 points,
The Direct conversion is provided.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F.S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
CCurrent consumption: 5V, 0 C500-LK203 Manual. 52A; 24V, --.
Standards: UC1, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Anaalog Output Units for converting binary ,
data into analog output signals C500-LK203 Manual.

CV500-MC Special I/O Unit Motion Control Servo Control 4 axis CV500-MC421.