CJ1G-CPU43P HOST CONNECTION MANUAL (Communications Commands)

Model: C200HW-PA204.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC.
Comments: ---.Commonly used with other Communications Units.Model: CPM2A-40CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 24 points.
Outputs points: 16 points.C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA004(3G2A5-DA004) CJ1G-CPU43P HOST CONNECTION MANUAL.
Output: 2 pts.
Specification: -10~+10V CJ1G-CPU43PProduct name: DC Power Supply Unit.
Power supply voltage: 24 VDC. 5A;
24-VDC output capacity, 0.8A;
Total power consumption, 25w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, No.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checking the operation status,
as well as the replacement CJ1G-CPU43P HOST CONNECTION MANUAL.
notification function for easy,
maintenance.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Unit to each I/O Units via the,
dedicated bus. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options. Unit classifi cation: CS1 CPU Bus Unit.
Product name:Controller Link Unit CJ1G-CPU43P HOST CONNECTION MANUAL.
Specifications: Communications cable,
Wired shielded twisted-pair cable;
Communications type, Data links and,
message service; Duplex support, No.
Max. Units mountable per CPU Unit, 8.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.33A; 26V, --.
Standards: UC1, N, L, CE.
New Controller Link Units,
Now with 4,000 Send Words.
The Controller Link is an,
FA network that can send,
and receive large amounts,
of data easily and at high speed.
The Controller Link supports data,
links that enable sharing data between,
PLCs and computers and a message service,
that enables sending aand receiving,
data whenever required CJ1G-CPU43P Manual.
With Wired Controller Link Units,
systems can be flexibly built by using,
Repeater Units to enable T branches,
long-distance wiring, and converting,
part of the network to optical cablee CJ1G-CPU43P Manual. Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block.
Weight: 210 g max.