CP1E-E10DR-A PROGRAMMING MANUAL (Software)

Connection type: Screw - Screw.
Description: Controller link repeater unit (wire to wire).Number of outputs: 8 pts.
Max. switch-ing capacity: 1.0 A at 24 V DC.
External connector: Terminal block.
Weight: 240 g max.Model: C200H-IA122.
No. of inputs: 16 pts.
Input voltage: 100 to 120 VAC, +10%/–15% CP1E-E10DR-A PROGRAMMING MANUAL.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler.
Indica-tor: LED CP1E-E10DR-A
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tioModel: C200HW-COM01.
Specifications: Communications port for Controller Link, SYSMAC LINK Units.Model: CPM2A-60CDR-A. Power supply: AC power supply.
Output type: Relay.
Inputs points: 36 points.
Outputs points: 24 points CP1E-E10DR-A PROGRAMMING MANUAL. Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-E10DR-A PROGRAMMING MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 200 VAC CV500-FHD02-E.Name: CS1D CPU Backplane.
Specifications: Applicable systems,
Single CPU System only;
Number of Power Supply Units, 2 Units max.
(for duplex operation);
Number of I/O Units, 8 slots max.
Current consumption: 5V system, 0.17A;
26V system, --.
Standards: UC1, N, LL, CE CP1E-E10DR-A Manual.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Model: C200H-AD003.
Input points: 8.
Voltage input: 1 to 5 V, 0 to 10 V, or –10 to 10 V.
Current input: 4 to 20 mA.Descriptioon: Operates as a DeviceNet slave CP1E-E10DR-A Manual. Model: C200H-OD218.
No. of points: 32 pts.
Specifications: nit 4.5 VDC, 16 mA to 26.4 VDC, 100 mA. .
Weight: 180g max.