CP1E-E20SDR-A PROGRAMMING MANUAL (Hardware)

NO. OF I/O SLOTS: 10 SLOTSUnit type: 10 I/O points 6 inputs; 4 outputs, Connector.
Input: 6 points: 24 VDC.
Output: 4 points: transistor (sinking).
Clock: Yes.
Slaves with the Complex Functionality Needed,
for Distributed Blocks.
Programmable Slaves combine devices, such as sensors and actuators,
into one functional unit that is treated as a DeviceNet slave CP1E-E20SDR-A PROGRAMMING MANUAL.
Programmable Slaves greatly facilitate device distribution,
and functional organization CP1E-E20SDR-A
They help standardize programming between units and reduce the amount of,
programming required at the master.
I/O and operational checks can be performed for each functional unit,
rather than waiting.
for final system assembly, as with conventional distributed I/O systems CP1E-E20SDR-A PROGRAMMING MANUAL. Name: Temperature Control Module.
Model: C200H-TC102.
Sensor: Platinum resistance thermometer: JPt100 Pt100.
Control output: Voltage output.Model: C200H-MD215.
No. of I/O pts: 16 inputs, 16 outputs.
Specifications: 24VDC.C500-OC I/O Unit Transistor Output 16 pts C500-OC223-E(3G2A5-OC223-E).
AC250/DC24V 2A.Model: C200HW-COM06-V1.
Specifications: One RS-422/485 port, one RS-232C port, and a protocol macro function CP1E-E20SDR-A PROGRAMMING MANUAL. Number of inputs: 8 pts.
Input Voltage: 12 to 24V DC.
Input Current: 10 mA.Unit type: CJ1 CPU Bus Units.
Product Name: Serial Communications,
Units High-speed type.
Specifications:Communications Interface,
2 RS-422A/485 ports; Communications functions,
The following functions can be selected,
for each port with an CJ system:
Protocol macro, Host Link, NT Links (1:N mode),
Serial Gateway, No-protocol, Modbus-RTU Slave,
The following functions can be selected,
for each port with an NJ system: Protocol macro,
Serial Gateway, No-protocol, Modbus-RTU Slave.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0.40A; 24V,,-- CP1E-E20SDR-A Manual.
Standards: UC1, N, L, CE.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485,, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol CP1E-E20SDR-A Manual.