CP1E-N20DT-A USER'S MANUAL (Communications Commands)

I/O Interface UnitConnects to right-hand side of CPU block.C500-OD I/O Unit Transistor Output 16 pts C500-OD215(3G2A5-OD215).
DC24V 50mA.C500-OD I/O Unit Transistor Output 32 pts C500-OD414(3G2A5-OD414).
DC12～48V 0.3A.Connects Power Supply Adapter and SYSMAC NET Link Unit.
Included with C200H-APS02 CP1E-N20DT-A USER'S MANUAL. CP1W-CIF41.
One Ethernet Option Board can be mounted in either option board slot 1 or 2 CP1E-N20DT-A
Note: Cannot be used for the CP1L-L10.Model: C200HW-COM04-V1.
Specifications: Communications port for the Controller Link, SYSMAC LINK Units, one RS-232C port, and a protocol macro function.Model : CVM1D-BI101.
10-slot.Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26 CP1E-N20DT-A USER'S MANUAL. 4 V.
External connector: Terminal block.
Weight: 180 g max.I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 120K steps.
Data memory capacity: 256K words (DM: 32K words, EM: 32K words ×7 banks)Model: C200H-TM001.
Timing method: CR oscillator.
No. of timers: 4
Setting ranges: 0.1 to 1.0 s, 1 to 10 s, 10 to 60 s, 1 to 10 min
Operation: Controllable from PLC program. Usable as accumulating timer CP1E-N20DT-A USER'S MANUAL.
External adjustment: Via C4K-CN223 (2 m) connector to 20-Name: Space Module.
Model: C200HW-CLK21.
Space Module: For I/O Module slots.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Analog setting: YES.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.Model: C200HW-PA204.
Supply voltage: 100 to 120 VAC, 200 to 240 VAC.
Comments: ---.One Ethernet Option Board can be mounted in either option board slot 1 or 2.
Note: Cannot be used for the CP1L-L10.Output method: Analog resolution: 1/6000.
Analog Inputs: 4.Model: C200H-DA001.
Input points: 2.
Voltage input: 1 to 5V or 0 to 10 V.
Current input: 4 to 20 mA.Name: e-CON Connectors.
Specifications: Outputs; 8 outputs ; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost caan be reduced CP1E-N20DT-A Manual.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1E-N20DT-A Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.