CP1E-N40S1DT-D REFERENCE MANUAL ()

Model: C200H-AD001.
Input points: 4.
Voltage input: 1 to 5V or 0 to 10 V.
Current input: 4 to 20 mA.C200HS-CPU23-E CPU
High Performance, Small Rack Style, Built-in RS-232C Port
The C200HS-CPU21-E and C200HS-CPU23-E controllers offer some of the same basic functionality as models C200H-CPU01-E/CPU03-E CP1E-N40S1DT-D REFERENCE MANUAL.
These controllers have the added capabilities ideally suited for high speed machine control,
which includes larger memory,
larger instruction set,
and increased speed CP1E-N40S1DT-D2-m Connecting Cable included (No other Connecting Cables required.).C500-ID I/O Unit DC Input 32 pts C500-ID218CN(3G2A5-ID218CN).
DC12-24V 10mA.Name: e-CON Connectors.
Specifications: Inputs; 8 inputs ; NPN;
Without Short-circuit and,
Disconnected Line Detection CP1E-N40S1DT-D REFERENCE MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CP1E-N40S1DT-D REFERENCE MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Applicable CPU Units: CQM1H-CPU51/61.
Pulse inputs: 4 inputs.
External outputs: 4 outputS.
Current consumption (Supplied from Power Supply Unit): 5 V DC, 400 mA max.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
CVM1-CL Special I/O Unit Communication Link Unit CVM1-CLK21.Model : C500-LDP01-V1.
Has 40 instructions (same as a C20P.) Input and output points (16 each.).Can be used for backing up programs or auto-booting.Model: C200H-B7A12.
I/O points: 32 input points or 30 input points and 2 error inputs.
Weight: 300g max.CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 8 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V;
1/4,000 (Settable to 1/8,000) *2.
Conversion period: 1 ms/point,
(Settable to 250 μs/point)*2.
Accuracy at ambient temperature of 25°C:
±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VVDC +10% -15%, 140mA max CP1E-N40S1DT-D Manual.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.14A; 24V, 0.14*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Anaalog Input Units for converting analog input,
signals into binary data CP1E-N40S1DT-D Manual.
Analog Output Units for converting binary ,
data into analog output signals.