CP1L-EM40DT-D OPERATION MANUAL ()

I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
ABS interface: Yes.Output method: Transistor sourcing.
Inputs: ---.
Outputs: 8.Product name: E@@S type CPU Units with 14 I/O Points.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 8; Outputs, 6;
Output type: Relay CP1L-EM40DT-D OPERATION MANUAL.
Program capacity: 2K steps.
memory Data capacity: 2K words CP1L-EM40DT-D
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.16A; 24 V，0.07A.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection CP1L-EM40DT-D OPERATION MANUAL. Model : CV500-CPU01-V1.
SFC / Ladder 512 (with RAM30K words, the top internal link).Power supply: DC power supply.
Output method: Relay output.
Inputs points: 6 points.
Outputs points: 4 points.Name: Three-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection CP1L-EM40DT-D OPERATION MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: DeviceNet Master Module.
Model: C2000HW-DRM21-V1 CP1L-EM40DT-D Manual.
Baud rate: 500, 250, or 125 kbps (selectable)

DeviceNet Master Unit
The DeviceNet Master Unit Is a Multi-vendor Bus Conforming to the DeviceNet.Model: C200H-AD001.
Input points: 4.
Voltage input: 1 to 5V or 0 tto 10 V CP1L-EM40DT-D Manual.
Current input: 4 to 20 mA.Connection type: Screw - ST connector.
Description: Controller link repeater unit (wire to graded-index glass fibre).