CS1W-MCH71 OPERATION MANUAL ()

C500-RM SYSMAC BUS Remote I/O Master Wired C500-RM001-PV1.
APF/PCF.Model: C200H-IA222.
No. of inputs: 16 pts.
Input voltage: 200 to 240 VAC, +10%/–15%.
Input current: 10mA, 200VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts CS1W-MCH71 OPERATION MANUAL.
Internal currentcon-sump-tioNO. OF I/O SLOTS: 6 SLOTSCV500-CN Cable Motion Control Connecting Cables 6 m CV500-CN624Model: C200H-OD411 CS1W-MCH71
No. of points: 8 pts.
Specifications: 1A, 12 to 48 VDC.Type: Analog inputs, counter inputs, analog outputs.
12 DC inputs: Yes.
Counter inputs: 1.
Analog inputs: 1.
8 transistor outputs: Yes.
2 pulse outputs: No.
2 analog outputs: Yes.I/O capacity: 512 pts (2, 048 max CS1W-MCH71 OPERATION MANUAL. with remote I/O).
Execution time: Basic: 0.15 µs min.Special: 0.6 µs min.
Name: Two-tier Screw Terminal Block.
Specifications: Inputs; 16 inputs; NPN.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CS1W-MCH71 OPERATION MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: CPM2C-16ETC. Units with transistor outputs only.
1 Fujitsu connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 16.
No. of unit numbbers allocated: 1 CS1W-MCH71 Manual.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk with one Position,
Control Unit that supports MECHATROLINK-II CS1W-MCH71 Manual.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.