OMRON
Home >> Download >> OMRON >> Manual Download >> DRT2-OD32ML-1 Installation Guide ()

DRT2-OD32ML-1 Installation Guide ()

Brand: OMRON
Product model: DRT2-OD32ML-1
Name: Programmable Terminals
Sort: Installation Guide
File language: English
File size: 22.25MB
Actuator: Roller lever (metal lever, bearing roller).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms DRT2-OD32ML-1 Installation Guide.
(Slow-action models with MBB contacts are available DRT2-OD32ML-1)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Type of drive rod: one-way action roller type (vertical motion) DRT2-OD32ML-1 Installation Guide.
Conduit size: single catheter type, M20.
Built in switch structure: slow motion (1NC).
Safety limit switch in accordance with global standard EN 50047.
The contact constitutes a complete variety, there is a single point of specification (1NC) and double contact specifications (1NC/1NO, 2NC).
Forced open action structure.
The slow moving contact structure is adopted to ensure that the contact distance is 4mm DRT2-OD32ML-1 Installation Guide.
Elevator and escalator can be used. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: SJT(O) cable *3.
Actuator: Pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models DRT2-OD32ML-1 Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation DRT2-OD32ML-1 Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-OD16SL
OMRON Screw-less Clamp Terminals with Transistors DRT2-OD16SL
Short/disconnection detection: Not supported.
OMRON
Board Terminals with MIL Connector
DRT2-OD32BV-1
OMRON Board Terminals with MIL Connector DRT2-OD32BV-1
Specifications: Outputs, PNP common, 32 o