Sensing method: Through-beam type (with slot).
Sensing distance: 3.6 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization E5ER-CT3DB-FLK Installation Guide.
Connectors with locks for safety against vibration
E5ER-CT3DB-FLK
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (PNP).
Output code: Binary.
Resolution (divisions): 32, 40.
Connection method: Pre-wired Model (1 m).
Rugged Rotary Encoder E5ER-CT3DB-FLK Installation Guide.
Absolute model.
External diameter of 50 mm.
Resolution of up to 1,024 (10-bit).
IP65 (improved oil-proof protection with sealed bearings).
Optimum angle control possible in combination with PLC or,
Cam Positioner. Sensing method: Diffuse-reflective Sensors.
Appearance: Horizontal.
Connection method: Connector (M12).
Sensing distance: 100 mm (wide view).
Functions: --.
Model: PNP output E5ER-CT3DB-FLK Installation Guide.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Ontology: program type.
Size: 48 x 96mm.
Type: control valve control type (1 input).
Control mode: 1 channel position ratio control.
Output (control / transfer) points: relay output (open 1 + 1 point).
Output (SUB) points: 2 points.
Event entry point: 4.
Serial communication: -.
New high speed, high precision digital regulator (Cheng Xuxing)!
Can be set up to 32 kinds of procedures.
1 units can be coordinated to run up to 4 channels.
High speed acquisition of 50ms.
With CX-Thermo on the computer easily set. Item: Advanced models; ATC function models.
Functions: ATC (Threshold value automatic correction).
Model: NPN output.
Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimizes light,
rreception at the press of a button E5ER-CT3DB-FLK Manual.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output E5ER-CT3DB-FLK Manual.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit.