H7CX-AS-G-N Communications Manual ()

Installation method: surface mount.
Action function: 8 multi-function action (A, B, C, D, E, F, G, H,).
Action mode / reset mode: time limit action / auto reset / external reset.
Set lock mechanism.
External connection: terminal with screw.
Time limit contact: 1c.
Instantaneous contact: No.
1 timer to achieve AC/DC free power,
8 action functions 0 H7CX-AS-G-N Communications Manual. 1 seconds to 9990 hours H7CX-AS-G-N
Through time display windows wide, eye-catching.
Free power mode using AC24 ~ 240V/DC12 ~ 240V.
And the DC specification does not have to specify the polarity.
8 action functions can be selected by the action function switch.
Combined operation of time setting switch and time unit switch,
RealizationDisplay type: DOWN display timer (decrements form the set time to 0) H7CX-AS-G-N Communications Manual.
Output type: Contact output (SPDT).
Pin type: 8-pin.
Memory backup: Not provided.
Supply voltage: 100 to 240 VAC, 12 to 48 VDC.
Rated time: 1 s to 99 min 59 s(See note 3.).
Miniature DIN-sized (48 x 48 mm) Quartz.
Timer with Abundant Series Versions.
Series version cover a wide range of rated times; 9.999 s,
99.99 s, 999.9 s, 99 min 59 s, and 99 hrs 59 min H7CX-AS-G-N Communications Manual.
Selection of elapsed time indication, remaining time indication,
contact output, and transistor output types to suit requirements.
Power supply freely selectable within a range of 100 to,
240 VAC, as well as 12 to 48 VDC.
Certified for UL and CSA safety standards. Control output: Time-limit SPDT and Instantaneous SPDT.
Supply voltage: 220 VAC (50/60 Hz).
Solid-state Timer with Single Time Range.
and Operating Mode.
Time range: H3BA-X8HA (0.05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only. Supply voltage: 24 to 240 VAC/DC.
Control output: Contact outputt, SPDT (time-limit SPDT) H7CX-AS-G-N Manual.
Four-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT ooutput contacts using a switch H7CX-AS-G-N Manual.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M.