K8AC-H12CC-FLK Communications Manual ()

Digital Rotary Pulse Meter Capable of 50 kHz Measurements.
Visual confirmation of judgement results through display colors that switch,
between red and green.
Measures High-speed Pulses at 50 kHz.
Provides high-speed pulse measurements up to 50 kHz of rotary encoder,
or ON/OFF pulse.
signals and can perform rotating measurement of high-speed rotating objects K8AC-H12CC-FLK Communications Manual K8AC-H12CC-FLK
Note: No-voltage contacts of up to 30 Hz are supported.
Six Measurement Operations Including Rotation (rpm)/Circumferential,
Speed, Ratio, and Cumulative.
One Rotary Pulse Meter has 6 rotary pulse measurement functions to,
support a variety.
of pulse measurement applications. Select the best function for your,
application from the K8AC-H12CC-FLK Communications Manual.
following: Rotation (rpm)/circumferential speed/instantaneous flowrate,
(value proportional to frequency), absolute ratio, error ratio, error,
flow rate ratio, and passing.
speed (value inversely proportional to frequency).
DeviceNet models added to the series. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V K8AC-H12CC-FLK Communications Manual.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Rotary encoder and a variety of ON/OFF pulse signals, the most up to 50kHz of high-speed pulse measurement.
Rotation measurement of high speed rotating objects can be carried out. Ideal for Monitoring 3-phase Power.
Supplies for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor overvoltages, undervoltages, phase sequence,
and phase loss ffor three-phase 3-wire or 4-wire power,
supplies with just one Unit K8AC-H12CC-FLK Manual.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply.
Two SPDT output relays, 5 A at 250 VAC (resistive load).
Output overvoltages and undervooltages using separate relays K8AC-H12CC-FLK Manual.
World-wide power specifications supported by one Unit (switchable).
Output status can be monitored using LED indicator.