ZX-EM07MT Introduction Manual (Inductive Displacement)

Item: Logic Alarm Cable (2 m).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory. Item (Measured particle diameter): Air Particle Sensor,
Particle measurement type 0.3, 0.5, or 1.0 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control ZX-EM07MT Introduction Manual. Optical system: Diffuse reflective; Regular reflective ZX-EM07MT
Measurement range: Height direction, 50±3 mm, 44±2 mm;
Width direction, 8 mm (typical).
Resolution: Height direction, 1 μm;
Width direction, 13 μm (8mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Optical system: Through-beam.
Measuring width: 10 mm.
Sensing distance: 0 to 500 mm ZX-EM07MT Introduction Manual.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Classification: High-sensitivity.
Contact gap: H (0.25 mm).
Actuator: Low force wire hinge lever; Low OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy ZX-EM07MT Introduction Manual.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Application: 410 × 410 mm.
Power supply: 24 VDC.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Nozzle gap.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 2m. Connnection method: Pre-wired ZX-EM07MT Manual.
Cable length: 2 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece ZX-EM07MT Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.