OMRON OMRON XV2-N-2 Price

Power supply: 3 phase 3 line rated voltage 500V AC.
Rated current: 6A.
Weight: 0.7KG.
Used to reduce the noise generated by the inverter.
Try to be close to the transducer for connection. Display contents: Decimal.
Display color: Red/green (two colors) (See note 1.).
Type: Negative.
Zero Suppression Incorporated.
Single-color (red or green) and two-color (red or green,
selectable) displays with a character height of 25 mm are,
available for a variety of applications and locations XV2-N-2
Miniature design with a 43-mm depth is perfect for saving,
space in equipment and devices.
A wide power supply range from 12 to 24 VDC.
Connectors are available, which allows easy maintenance.
Negative logic input. Ratings: 1 A at 30 VDC.
LED indicator: Without indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Size: 96 x 96mm.
Control output 1: relay output.
Control output 2: relay output.
Auxiliary output: 4 points (auxiliary output 2, 1 common, auxiliary output 3, 4 public general).
Power supply voltage: AC/DC24V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 1 points.
Communication: -.
Event input: 4 points.
Remote SP input: -.
Transfer output: -.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the component communication.
A new type of proportional control allows you to control the valve.
XV2-N-2 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=XV2-N-2&select=5