Home
>> Products
>> OMRON
>> Switch
>> Push button switch
>> button switch φ16 with light / without light / display lamp
>> A165L-ARM-T2-2S Pushbutton Switch
A165L-ARM-T2-2S Pushbutton Switch
OMRON A165L-ARM-T2-2S Product information and technical parameters：
Brand: OMRON
Name: Pushbutton Switch
Model: A165L-ARM-T2-2S
Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 200/220 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 5 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28 A165L-ARM-T2-2S. 5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads A165L-ARM-T2-2S
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Appearance: Round/Projection type A22-T.
Output: SPST-NO + SPST-NO.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) A165L-ARM-T2-2S.
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals A165L-ARM-T2-2S.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Type: square.
Screen mode: no segmentation.
Light way: incandescent lamp.
Power supply voltage: 6V.
Operation Department color: yellow.
Square 40mm body of the indicator light series.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement. Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller levver models that enable ganged mounting A165L-ARM-T2-2S.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
((standard indicator is lit when Switch is not operating) A165L-ARM-T2-2S.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Lighting: Incandescent lamp.
Operating voltage: 5 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28 A165L-ARM-T2-2S. 5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads A165L-ARM-T2-2S
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Appearance: Round/Projection type A22-T.
Output: SPST-NO + SPST-NO.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black) A165L-ARM-T2-2S.
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals A165L-ARM-T2-2S.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Type: square.
Screen mode: no segmentation.
Light way: incandescent lamp.
Power supply voltage: 6V.
Operation Department color: yellow.
Square 40mm body of the indicator light series.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement. Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller levver models that enable ganged mounting A165L-ARM-T2-2S.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
((standard indicator is lit when Switch is not operating) A165L-ARM-T2-2S.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
...More relevant models >>>>
Last one: OMRON Pushbutton Switch A165L-APWM-T1-2S
next one: OMRON Pushbutton Switch A165L-AYM-T2-2S
Related download