Home
>> Products
>> OMRON
>> Switch
>> Push button switch
>> button switch φ16 with light / without light / display lamp
>> A165L-JPWM-T1-2 Pushbutton Switch
A165L-JPWM-T1-2 Pushbutton Switch
OMRON A165L-JPWM-T1-2 Product information and technical parameters：
Brand: OMRON
Name: Pushbutton Switch
Model: A165L-JPWM-T1-2
Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
Type: Low-sensitivity; 8-pin.
Space-saving Design Ideal for Control Panel.
Downsizing. Easy Maintenance.
Compact: 49.4 × 38 × 84 mm (H×W×D).
Easy identification of operating status with LED operation indicator.
Independent DPDT contacts on 11-Pin Models.
CE marking and UL/CSA compliance. Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) A165L-JPWM-T1-2.
Operation: Alternate operation (Self-holding) A165L-JPWM-T1-2
Case color: Light gray.
Output: DPDT.
Lighting: LED; 24 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting) A165L-JPWM-T1-2.
included in lineup. Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Sealed roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection A165L-JPWM-T1-2.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Type: M10.
Actuator: Hemispheric actuator.
Cable length: 1 m.
Detects Objects in Multiplle Directions,
with High Sensitivity, Ideal for Robotics,
Slow-action switching mechanism used A165L-JPWM-T1-2.
Gold-plated contact with coil spring capable of switching,
micro current/voltage load while providing high contact reliability.
Inpuuts directly to microcomputers and programmable controllers A165L-JPWM-T1-2.
Three sizes (M10, M8, and M5) and three types of compact actuators.
Easy panel mounting.
Space-saving Design Ideal for Control Panel.
Downsizing. Easy Maintenance.
Compact: 49.4 × 38 × 84 mm (H×W×D).
Easy identification of operating status with LED operation indicator.
Independent DPDT contacts on 11-Pin Models.
CE marking and UL/CSA compliance. Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) A165L-JPWM-T1-2.
Operation: Alternate operation (Self-holding) A165L-JPWM-T1-2
Case color: Light gray.
Output: DPDT.
Lighting: LED; 24 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting) A165L-JPWM-T1-2.
included in lineup. Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Sealed roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection A165L-JPWM-T1-2.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Type: M10.
Actuator: Hemispheric actuator.
Cable length: 1 m.
Detects Objects in Multiplle Directions,
with High Sensitivity, Ideal for Robotics,
Slow-action switching mechanism used A165L-JPWM-T1-2.
Gold-plated contact with coil spring capable of switching,
micro current/voltage load while providing high contact reliability.
Inpuuts directly to microcomputers and programmable controllers A165L-JPWM-T1-2.
Three sizes (M10, M8, and M5) and three types of compact actuators.
Easy panel mounting.
...More relevant models >>>>
Last one: 
next one: Related download