CQM1-DA021 Analog Output Module

Number of outputs: 8 pts.
Max. switch-ing capacity: 2 A at 24 V DC.
External connector: Terminal block.
Weight: 200 g max.Supply voltage: 100 to 240 V AC, 50/60 Hz (wide range).
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 3.6 A(18 W).Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC CQM1-DA021.
Max Switching Current: 2 Amps.
Common Type: Independent.Specifications: 8 Kwords without clock CQM1-DA021Number of I/O points: 128 inputs and 128 outputs.Specification: 16 output points.Connects to the I/O module located on the extreme right.Specifications: 16 Kwords with clock.Number of outputs: 32 pts.
Max. switch-ing capacity: 0.5 A at 24 V DC.
External connector: Connector.
Weight: 210 g max CQM1-DA021. I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Analog setting: YES.Specification: Thermocouple input (K, J, L, T, R, S, B),
heater burnout alarm,
ON/OFF or advanced PID control,
manual operation,
transistor (PNP) output, 2 loops.Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected CQM1-DA021. Number of inputs: 32 pts.
Input Voltage: 12 V DC.
Input Current: 4 mA.Specification: Platinum resistance thermometer input (Pt100, JPt100),
manual operation,
ON/OFF or advanced PID control,
transistor (NPN) output, 4 loops.I/O points: 512 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.Number of outputs: 16 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Shared.Number of outputs: 16 pts.
Max. switch-ing capacity: 50 mA at 4.5 V DC to 300 mA at 26.4 V.
External connector: Terminal block CQM1-DA021.
Weight: 180 g max.Supply voltage: 100 or 230 V AC (selectable), 50/60 Hz.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).One of the following connection ccables is required for ladder programming CQM1-DA021. Specification: Thermocouple input (J/K),
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops.