CRT1-OD08TAH-1 CompoNet Gateway Unit for CC-Link

OMRON CompoNet Gateway Unit for CC-LinkCRT1-OD08TAH-1

CRT1-OD08TAH-1 Introduce | CRT1-OD08TAH-1 Catalog / Manual / Instructions / Software download

OMRON CRT1-OD08TAH-1 Manual And Instructions
CRT1-OD08TAH-1 datasheetPDF datasheet

OMRON CRT1-OD08TAH-1 Product information and technical parameters：
Brand: OMRON
Name: CompoNet Gateway Unit for CC-Link
Model: CRT1-OD08TAH-1
Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.

I/O classification: Digital I/O.
Internal I/O circuit common: NPN (- common).
I/O points: 16.
I/O connection method: M3 terminal block.
Models with 3-tier Terminals (16 Points),
Added to the Remote I/O Terminal Series.
Six Models are Available Depending on the,
NPN or PNP Configuration, Input Points,
I/O Points, or Output Points CRT1-OD08TAH-1.
Incorporates easy-to-wire terminals each,
connecting to a single wire CRT1-OD08TAH-1
Reduces designing and wiring effort.
Incorporates a removable circuit block of cassette construction. Specifications: Outputs;
NPN (- common); 32 points.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC CRT1-OD08TAH-1.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Specifications: I/O; PNP (input: - common,
output: + common)); Input:
8 points/Output: 8 points.
I/O connections: M3 screw terminals.
Rated internal circuit power supply voltage:
Supplied from Basic Unit CRT1-OD08TAH-1.
I/O power supply voltage: 24 VDC.
A Smart Slave with a 3-tier Terminal,
Block That Means Wiring Locations,
Are Easy to Understand with No,
Sharing of Terminals.
Easy wiring with no sharing of terminals.
Easy-to-understand wiring locations.
No relay terminal block terminals required.
Detachable cassette-type circuit sections. Name: Repeater Unit.
Specifications: A sub-trunk line can be,
connected downstream,
(for trunk-branch line configuration),
or further branching is enabled downstream,
(for configurations with no wiring restrictions),
in the same way as for a Master Unit.
A Repeater Unit can be used to branch,
the trunk line and increase the,
number of connected Units,
as well as to extend the length of the,
communications line.
Standards: CE, U, U1, L, N.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is suppliied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection CRT1-OD08TAH-1.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits CRT1-OD08TAH-1.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application.

...More relevant models >>>>