D4SL-N3GFG-D4 Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key

OMRON Guard Lock Safety-door Switch/D4SL-N-mounting Slide KeyD4SL-N3GFG-D4

D4SL-N3GFG-D4 Introduce | D4SL-N3GFG-D4 Catalog / Manual / Instructions / Software download

OMRON D4SL-N3GFG-D4 Manual And Instructions
D4SL-N3GFG-D4 datasheetPDF datasheet
D4SL-N3GFG-D4 INSTRUCTION sheet

OMRON D4SL-N3GFG-D4 Product information and technical parameters：
Brand: OMRON
Name: Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key
Model: D4SL-N3GFG-D4
Release Key Type: Special (resin).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.

Release key type: Special release key.
Indicator: Orange.
Lock and release types: Solenoid lock Mechanical release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+2NC/1NO.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns D4SL-N3GFG-D4.
Standard gold-clad contacts enable use with ordinary loads,
and microloads D4SL-N3GFG-D4
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Description: OS32C with back location cable entry D4SL-N3GFG-D4.
Max. Operating Range (Safety Zone): 3m.
Remarks: CD-ROM (Configuration tool) OS supported: Windows 2000,
Windows XP (32-bit version, Service Pack 3 or later),
Windows Vista (32-bit version), Windows 7 (32-bit version/64-bit version),
For configuration tool version, refer to page 23.
Compact (104.5 mm), lightweight (1.3 kg),
and easy-to-install Safety Laser Scanner D4SL-N3GFG-D4.
Provides a safety circuit of PLd/Safety Category 3 (ISO13849-1) without a,
dedicated controller.
Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
70 sets of safety zone and warning zone combinations are available,
supporting complicated changes in working environments.
A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set.
The minimum object resolution can be changed to 30, 40, 50 or 70 mm.
The response time is configurable from 80 ms to a maximum of 680 ms.
Reference Boundary Monitoring function prevents unauthorized changes in,
the scanner position.

Minimal down time, sensor block can be replaced without the need to reprogram D4SL-N3GFG-D4. Number of beams: 16.
Protective height: 395mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets off series-connected sensors D4SL-N3GFG-D4.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions.

...More relevant models >>>>