Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 61 (81).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
M30; both long and short barrels).
Modular construction simplifies customization.
Name: Tape reflector.
Directional angle: 30° min.
Ambient operating temperature range: 0 to 40°C.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: IEC IP67.
Accessories: --. Item: Standard models E2A-M18LS08-WP-C1 2M.
Functions: Timer, Response speed change.
Model: PNP output.
Advanced Fiber Amplifier Units
E2A-M18LS08-WP-C1 2M
Features a Power Tuning function that optimizes light,
reception at the press of a button.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output E2A-M18LS08-WP-C1 2M.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor E2A-M18LS08-WP-C1 2M.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M30.
Detection distance: 20mm.
Action mode: NO. Small, easy to use.
Detection mode: on the radio.
Shape: horizontal type.
Connection mode: lead wire.
Detection distance: 2 meters of red light.
Output mode: NPN output. E32-D11U type: standard type; coating,
Specialty: M6 screw fluoride coating,
Bending radius (mm): U; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsFree change detection direction.
Easy to use small cube type.
Can change the direction of detection according to the position of the front and side (15 degree). Item: Standard moddels E2A-M18LS08-WP-C1 2M.
Connection method: Pre-wired (2 m).
Ratings and Specifications: --.
Model: PNP output.
Simple and Affordable Fiber Amplifier Units.
Reasonable price.
Use the one-key one-function feature for quick,
easy operation.
GIGA RAY for the highest level of power in this class for,
stable detection even with sensing objects with low E2A-M18LS08-WP-C1 2M.
reflection or large sensing objects.