E2B-M18LN16-M1-C1 Proximity Sensors

Name: Sensor.
Cable length: 1 m.
Easy-to-use, Simple Magnetic.
Proximity Sensor.
Permanent magnetic used to operate the reed switch.
Ideal for detecting opening and closing of doors. Appearance: 4 dia.
Sensing distance: 1.2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant) E2B-M18LN16-M1-C1.
Operation mode: NC.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V E2B-M18LN16-M1-C1
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max E2B-M18LN16-M1-C1.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Type: Unshielded.
Appearance: Screw, M18 × 46.3 mm E2B-M18LN16-M1-C1.
Sensing distance: 7 mm.
Repeat accuracy: 5 μm.
Cable specification: Standard.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit. Sensing method: Through-beam type.
Output type: NPN output.
Output configuration: Dark-ON or Light-ON (selectable).
Cable length: 1 m.
Liquid Level Photomicrosensor with,
operation mode and sensitivity selectors,
for easy application E2B-M18LN16-M1-C1.
Operation mode selector allows modes to be switched easily.
Sensitivity selector is suitable for any 6- to 13-mm-diameter transparentt or,
semi-transparent pipe with a wall thickness of 1 mm E2B-M18LN16-M1-C1.
Uses a clean (with no powder parting agent) cable.
Operating voltage range: 12 to 24 VDC.