Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2E2-X18MY1 Long-barrel Inductive Proximity Sensor
E2E2-X18MY1 Long-barrel Inductive Proximity Sensor
OMRON E2E2-X18MY1 Manual And Instructions
E2E2-X18MY1 datasheetPDF datasheet
OMRON E2E2-X18MY1 Product information and technical parameters：
Brand: OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X18MY1
Appearance: Unshielded, M30.
Sensing distance: 18 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
...More relevant models >>>>
E2E2-X18MY1 datasheetPDF datasheet
OMRON E2E2-X18MY1 Product information and technical parameters：
Brand: OMRON
Name: Long-barrel Inductive Proximity Sensor
Model: E2E2-X18MY1
Appearance: Unshielded, M30.
Sensing distance: 18 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
Specification: Resin, different end diameter.
Shaft interior (tolerance *) exterior dia: 6 dia. 10 dia. (Height: 8), 22 dia.
Couplings.
Coupling Materials and Characteristics.
OMRON provides two types of couplings for different.
application conditions: Resin and metal.
Select the best type for the application E2E2-X18MY1. E32-T33-S5 type: special beam type; ultra small / small diameter beam,
Specialty: Phi 0 E2E2-X18MY15 casing,
Open diameter: 0.25,
Shape / detection distance (mm): 53; 44; 25 (10),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 0.25 (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector E2E2-X18MY1.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor E2E2-X18MY1.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Size: M12 (brass), single distance, shielding type.
Detection range: 10mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E2E2-X18MY1.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the conditiion of the work site E2E2-X18MY1.
Simulation test was carried out in the environment of high oil mist concentration. 0.3m fine beam L61 econ - E3Z -
Reflective type
Shaft interior (tolerance *) exterior dia: 6 dia. 10 dia. (Height: 8), 22 dia.
Couplings.
Coupling Materials and Characteristics.
OMRON provides two types of couplings for different.
application conditions: Resin and metal.
Select the best type for the application E2E2-X18MY1. E32-T33-S5 type: special beam type; ultra small / small diameter beam,
Specialty: Phi 0 E2E2-X18MY15 casing,
Open diameter: 0.25,
Shape / detection distance (mm): 53; 44; 25 (10),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 0.25 (0.005),
Fiber element for meeting diversified needsHigh performance price ratio standard type proximity sensor.
Standard cable protector E2E2-X18MY1.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC. Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor E2E2-X18MY1.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. Size: M12 (brass), single distance, shielding type.
Detection range: 10mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E2E2-X18MY1.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the conditiion of the work site E2E2-X18MY1.
Simulation test was carried out in the environment of high oil mist concentration. 0.3m fine beam L61 econ - E3Z -
Reflective type
...More relevant models >>>>
Last one: OMRON Long-barrel Inductive Proximity Sensor E2E2-X10MY1
next one: OMRON Long-barrel Inductive Proximity Sensor E2E2-X2Y2
Related download