Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2G-M18KN14-M1-D2 Cylindrical proximity sensor
E2G-M18KN14-M1-D2 Cylindrical proximity sensor
OMRON E2G-M18KN14-M1-D2 Product information and technical parameters：
Brand: OMRON
Name: Cylindrical proximity sensor
Model: E2G-M18KN14-M1-D2
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: non shield, M18.
Detection range: 14mm.
Action mode: NC.
Size: M12 (Brass); Single; Unshielded.
Sensing distance: 20 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Appearance: Shielded, M18.
Sensing distance: 5 mm.
Output configuration : AC 2-wire E2G-M18KN14-M1-D2.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case E2G-M18KN14-M1-D2
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. E32-S15-2 fiber unit uses OMRON''s original polarized light multilayer technology (FAO)
Can not be affected by the color of the workpiece, the subtle luster
To carry out a stable testAppearance: Unshielded, M18 E2G-M18KN14-M1-D2.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. Appearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide E2G-M18KN14-M1-D2.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. E3JK-T61 for firing type,
E3JK direct current mode: mode; shading ON,
Miniature amplifier built-in type photoelectric switchAppearance: T-shaped.
Sennsing method: Through-beam type (with slot) E2G-M18KN14-M1-D2.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: No incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that iis still easy to use E2G-M18KN14-M1-D2.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
Sensing distance: 20 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Appearance: Shielded, M18.
Sensing distance: 5 mm.
Output configuration : AC 2-wire E2G-M18KN14-M1-D2.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case E2G-M18KN14-M1-D2
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. E32-S15-2 fiber unit uses OMRON''s original polarized light multilayer technology (FAO)
Can not be affected by the color of the workpiece, the subtle luster
To carry out a stable testAppearance: Unshielded, M18 E2G-M18KN14-M1-D2.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. Appearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide E2G-M18KN14-M1-D2.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: NPN output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. E3JK-T61 for firing type,
E3JK direct current mode: mode; shading ON,
Miniature amplifier built-in type photoelectric switchAppearance: T-shaped.
Sennsing method: Through-beam type (with slot) E2G-M18KN14-M1-D2.
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: No incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that iis still easy to use E2G-M18KN14-M1-D2.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC.
...More relevant models >>>>
Last one: OMRON Cylindrical proximity sensor E2G-M12KN08-M1-D2
next one: OMRON Cylindrical proximity sensor E2G-M30KN20-M1-D2
Related download