Home
>> Products
>> OMRON
>> Sensor
>> Fiber sensor
>> fiber head
>> E32-T84S-S Optical fiber sensor
E32-T84S-S Optical fiber sensor
OMRON E32-T84S-S Manual And Instructions
E32-T84S-S datasheetPDF datasheet
OMRON E32-T84S-S Product information and technical parameters：
Brand: OMRON
Name: Optical fiber sensor
Model: E32-T84S-S
E32-T84S-S type: environment resistant; heat resistant,
Speciality: heat resistance of 200 DEG C: side; L shape,
Shape / detection distance (mm): 1750; 1300; 870 (350),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 1.7 (0.1),
Fiber element for meeting diversified needs
...More relevant models >>>>
E32-T84S-S datasheetPDF datasheet
OMRON E32-T84S-S Product information and technical parameters：
Brand: OMRON
Name: Optical fiber sensor
Model: E32-T84S-S
E32-T84S-S type: environment resistant; heat resistant,
Speciality: heat resistance of 200 DEG C: side; L shape,
Shape / detection distance (mm): 1750; 1300; 870 (350),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 1.7 (0.1),
Fiber element for meeting diversified needs
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M18.
Detection range: 5mm.
Output configuration: PNP.
Action mode: NO. Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function E32-T84S-S.
Sensing distance: 7 m[100 mm](When using E39-R1) E32-T84S-S
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E32-T84S-S. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Connection method: Pre-wired connector E32-T84S-S.
Cable length: 0.5 m.
Sensing distance: 50 ± 10 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: non shield, M8.
Detection range: 4mm.
Action mode: NC. Sensing method: Through-beam type (with slot).
Sensing distance (slot width): 13 mm (slot width).
Output type: NPNN output E32-T84S-S.
Outpu configuration: Dark-ON.
A Wide Slot Width of 13 mm and.
Superior Resistance to Light.
Interference and Noise.
Noise resistance equivalent to photomicrosensors with built-in amplifiers.
Resistance to common noise at lleast 30 times that of previous models E32-T84S-S.
Resistance to inverter noise at least 10 times that of previous models.
Reverse polarity protection built in.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M18.
Detection range: 5mm.
Output configuration: PNP.
Action mode: NO. Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function E32-T84S-S.
Sensing distance: 7 m[100 mm](When using E39-R1) E32-T84S-S
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E32-T84S-S. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Connection method: Pre-wired connector E32-T84S-S.
Cable length: 0.5 m.
Sensing distance: 50 ± 10 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: non shield, M8.
Detection range: 4mm.
Action mode: NC. Sensing method: Through-beam type (with slot).
Sensing distance (slot width): 13 mm (slot width).
Output type: NPNN output E32-T84S-S.
Outpu configuration: Dark-ON.
A Wide Slot Width of 13 mm and.
Superior Resistance to Light.
Interference and Noise.
Noise resistance equivalent to photomicrosensors with built-in amplifiers.
Resistance to common noise at lleast 30 times that of previous models E32-T84S-S.
Resistance to inverter noise at least 10 times that of previous models.
Reverse polarity protection built in.
...More relevant models >>>>
Last one: 
next one: Related download