Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> photoelectric sensor amplifier separation type
>> E3C-JC4P Photoelectric sensor
E3C-JC4P Photoelectric sensor
OMRON E3C-JC4P Manual And Instructions
E3C-JC4P datasheetPDF datasheet
E3C-JC4P INSTRUCTION sheet
OMRON E3C-JC4P Product information and technical parameters：
Brand: OMRON
Name: Photoelectric sensor
Model: E3C-JC4P
Power: DC.
Usage: slender type.
Amplifier unit
...More relevant models >>>>
E3C-JC4P datasheetPDF datasheet
E3C-JC4P INSTRUCTION sheet
OMRON E3C-JC4P Product information and technical parameters：
Brand: OMRON
Name: Photoelectric sensor
Model: E3C-JC4P
Power: DC.
Usage: slender type.
Amplifier unit
E3Z-G62-S0SHW-E3 is selected for use with 1 optical axis and 13 axis type
Prevent mutual interference function, EN standard specifications
Groove type photoelectric sensor without optical axis adjustmentConnection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output E3C-JC4P.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0 E3C-JC4P002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Size: M18 (brass), two times the distance type, shielding type.
Detection range: 8mm.
Connection mode: lead type (cable length is 2M and 5m two) E3C-JC4P.
Thread length: long thread type.
Output type: NPN.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E3C-JC4P.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Sensing method: Through beam.
Connection method (cable length): Pre-wired (5 m).
Sensing distance: 3m.
Beams: Gap, 25 mm; Qty, 5.
Sensingwidth: 100 mm.
External indicator: --.
Compact, Resistant to Mutual.
Interference, and Ideal for Picking a Variety of Parts.
Mounts to a parts rack and uses indicators to show parts,
picking procedures. Functions as a mistake-proofing Sensor.
Use either the built-in LED indicators or external picking indicators. Size: M30, Shielded.
Sensing distance: 15.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 66 (80).
Output connfiguration: NPN E3C-JC4P.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated E3C-JC4P.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
Prevent mutual interference function, EN standard specifications
Groove type photoelectric sensor without optical axis adjustmentConnection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output E3C-JC4P.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0 E3C-JC4P002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Size: M18 (brass), two times the distance type, shielding type.
Detection range: 8mm.
Connection mode: lead type (cable length is 2M and 5m two) E3C-JC4P.
Thread length: long thread type.
Output type: NPN.
Action mode NO.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor E3C-JC4P.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Sensing method: Through beam.
Connection method (cable length): Pre-wired (5 m).
Sensing distance: 3m.
Beams: Gap, 25 mm; Qty, 5.
Sensingwidth: 100 mm.
External indicator: --.
Compact, Resistant to Mutual.
Interference, and Ideal for Picking a Variety of Parts.
Mounts to a parts rack and uses indicators to show parts,
picking procedures. Functions as a mistake-proofing Sensor.
Use either the built-in LED indicators or external picking indicators. Size: M30, Shielded.
Sensing distance: 15.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 66 (80).
Output connfiguration: NPN E3C-JC4P.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated E3C-JC4P.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.
...More relevant models >>>>
Last one: 
next one: Related download