Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> photoelectric sensor amplifier built-in
>> E3FA-DN16 2M Photoelectric sensors
E3FA-DN16 2M Photoelectric sensors
OMRON E3FA-DN16 2M Product information and technical parameters：
Brand: OMRON
Name: Photoelectric sensors
Model: E3FA-DN16 2M
Sensor type: Diffuse-reflective.
Sensing distance: 1 m.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing.
Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 11 m[100 mm](When using E39-R2).
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) E3FA-DN16 2M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E3FA-DN16 2M5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) E3FA-DN16 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Remarks: Attached to each Sensor Head.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching) E3FA-DN16 2M.
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit. E32-M21 type: special beam type; region detection,
Specialty: multi point detection (4 probe),
Shape / detection distance (mm): 750; 610; 350 (140),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 2 (0.1),
Fiber element for meeting diversified needsSuper fine tuning button.
Large size of the fine adjustment button, the threshold adjustment is more convenient.
Large display + status indicator.
Connection mode: lead wire.
Output mode: PNP output. Sensing distance: (See note 2.)0 to 3.5 mm(pressed position) (See note 1.).
Sensing method: Pushbutton.
Operation mode: ON with no load.
Cable length: 1 m (robot cable).
Model: NPN output .
Using a pushbutton enables,
accurately detecting difficult-to-detec objects.
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or refleectance of the bottoms of the cassettes E3FA-DN16 2M.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a lonng life,
(mechanical life: 5 million operations min E3FA-DN16 2M. ).
Models available with PNP or NPN output.
Models are available with very flexible robot cable.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 11 m[100 mm](When using E39-R2).
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) E3FA-DN16 2M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E3FA-DN16 2M5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) E3FA-DN16 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Remarks: Attached to each Sensor Head.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching) E3FA-DN16 2M.
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit. E32-M21 type: special beam type; region detection,
Specialty: multi point detection (4 probe),
Shape / detection distance (mm): 750; 610; 350 (140),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 2 (0.1),
Fiber element for meeting diversified needsSuper fine tuning button.
Large size of the fine adjustment button, the threshold adjustment is more convenient.
Large display + status indicator.
Connection mode: lead wire.
Output mode: PNP output. Sensing distance: (See note 2.)0 to 3.5 mm(pressed position) (See note 1.).
Sensing method: Pushbutton.
Operation mode: ON with no load.
Cable length: 1 m (robot cable).
Model: NPN output .
Using a pushbutton enables,
accurately detecting difficult-to-detec objects.
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or refleectance of the bottoms of the cassettes E3FA-DN16 2M.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a lonng life,
(mechanical life: 5 million operations min E3FA-DN16 2M. ).
Models available with PNP or NPN output.
Models are available with very flexible robot cable.
...More relevant models >>>>
Last one: 
next one: Related download