Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> E3JK-DN14 2M Built-in Power Supply Photoelectric Sensor
E3JK-DN14 2M Built-in Power Supply Photoelectric Sensor
OMRON E3JK-DN14 2M Manual And Instructions
E3JK-DN14 2M datasheetPDF datasheet
OMRON E3JK-DN14 2M Product information and technical parameters：
Brand: OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN14 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 300 mm.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
E3JK-DN14 2M datasheetPDF datasheet
OMRON E3JK-DN14 2M Product information and technical parameters：
Brand: OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-DN14 2M
Power supply voltage: DC.
Sensing method: Diffuse-reflective.
Sensing distance: 300 mm.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NC. E32-T16J type: special beam type; region detection,
Specialty: width 11mm side,
Shape / detection distance (mm): 1300; 1000; 650 (260),
Bending radius (mm): R10 E3JK-DN14 2M E3JK-DN14 2M
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsOptical system: diffuse type.
Detection distance: 80 positive and negative 15mm.
Beam shape: linear beam.
Beam diameter: 900mm * 60 M.
Resolution: 2 m.
Cable length: 1m. Appearance: Unshielded.
Sensing distance: 5 mm E3JK-DN14 2M.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available. Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 300 mm.
Operation mode: Light-ON.
Model: NPN output.
Makes Mounting and Installation Simpler and Smoother E3JK-DN14 2M.
Suitable for Applications in the Rechargeable Battery Industry. Sensing method: Reflective model(for mark detection).
Connection method: Pre-wired (2 m).
Sensing distance: 70±10 mm.
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objects and slight color differences.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences. Sensing distance: (See note 2.)0 to 3.5 mm(pressed position) (See note 1.).
Sensing method: Pushbutton.
Operation mode: ON with no load.
Cable length: 1 m (robot cable).
Model: NPN output .
Using a pushbutton enables,
accurately detecting difficult-to-detec objects.
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or refleectance of the bottoms of the cassettes E3JK-DN14 2M.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a lonng life,
(mechanical life: 5 million operations min E3JK-DN14 2M. ).
Models available with PNP or NPN output.
Models are available with very flexible robot cable.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NC. E32-T16J type: special beam type; region detection,
Specialty: width 11mm side,
Shape / detection distance (mm): 1300; 1000; 650 (260),
Bending radius (mm): R10 E3JK-DN14 2M E3JK-DN14 2M
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsOptical system: diffuse type.
Detection distance: 80 positive and negative 15mm.
Beam shape: linear beam.
Beam diameter: 900mm * 60 M.
Resolution: 2 m.
Cable length: 1m. Appearance: Unshielded.
Sensing distance: 5 mm E3JK-DN14 2M.
Model: Operation mode, NO.
Standard Flat Sensors in.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available. Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 300 mm.
Operation mode: Light-ON.
Model: NPN output.
Makes Mounting and Installation Simpler and Smoother E3JK-DN14 2M.
Suitable for Applications in the Rechargeable Battery Industry. Sensing method: Reflective model(for mark detection).
Connection method: Pre-wired (2 m).
Sensing distance: 70±10 mm.
Extremely thin beam ideal for detection of minute objects and marks.
Ideal for detection of small objects and slight color differences.
Bad mark detection.
Detection of thin wire of 200 μ.
Detection of slight level differences. Sensing distance: (See note 2.)0 to 3.5 mm(pressed position) (See note 1.).
Sensing method: Pushbutton.
Operation mode: ON with no load.
Cable length: 1 m (robot cable).
Model: NPN output .
Using a pushbutton enables,
accurately detecting difficult-to-detec objects.
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or refleectance of the bottoms of the cassettes E3JK-DN14 2M.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a lonng life,
(mechanical life: 5 million operations min E3JK-DN14 2M. ).
Models available with PNP or NPN output.
Models are available with very flexible robot cable.
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-DP13 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-DP14 2M
Related download