Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> E3JK-TN14 2M Built-in Power Supply Photoelectric Sensor
E3JK-TN14 2M Built-in Power Supply Photoelectric Sensor
OMRON E3JK-TN14 2M Manual And Instructions
E3JK-TN14 2M datasheetPDF datasheet
OMRON E3JK-TN14 2M Product information and technical parameters：
Brand: OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-TN14 2M
Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
E3JK-TN14 2M datasheetPDF datasheet
OMRON E3JK-TN14 2M Product information and technical parameters：
Brand: OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-TN14 2M
Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Appearance: M8.
Sensing distance: 4 mm.
Connection method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Polarity: Yes.
Operation mode : NO.
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E E3JK-TN14 2M.
Standard Sensors for detecting ferrous metals.
Wide array of variations E3JK-TN14 2M Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection E3JK-TN14 2M.
Cable protector provided as a standard feature. E32-VF11CH flangeConnection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications E3JK-TN14 2M.
Long-distance model for up to 1,000 mm. Item: Advanced models with 4-color determination.
Functions: Standard model + 4-color determination AND/OR output, Bank switching.
Model: NPN output.
Easy and Reliable.
The Fiber Amplifier Unit That Sees in Color.
High-power white LED and multi-RGB processing eliminate the need,
to select light source (wavelength) types.
One-touch teaching enables stable detection that resists against,
workpiece vibration.
Choose from a wide range of Fiber Heads to match the workpiece and,
working space. Size: M12 (Brass); Single; Shielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Size: M18 (brass), single distance, non shield type.
Detection range: 10mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to pricce ratio E3JK-TN14 2M.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site E3JK-TN14 2M.
Simulation test was carried out in the environment of high oil mist concentration.
Sensing distance: 4 mm.
Connection method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Polarity: Yes.
Operation mode : NO.
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E E3JK-TN14 2M.
Standard Sensors for detecting ferrous metals.
Wide array of variations E3JK-TN14 2M Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection E3JK-TN14 2M.
Cable protector provided as a standard feature. E32-VF11CH flangeConnection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications E3JK-TN14 2M.
Long-distance model for up to 1,000 mm. Item: Advanced models with 4-color determination.
Functions: Standard model + 4-color determination AND/OR output, Bank switching.
Model: NPN output.
Easy and Reliable.
The Fiber Amplifier Unit That Sees in Color.
High-power white LED and multi-RGB processing eliminate the need,
to select light source (wavelength) types.
One-touch teaching enables stable detection that resists against,
workpiece vibration.
Choose from a wide range of Fiber Heads to match the workpiece and,
working space. Size: M12 (Brass); Single; Shielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. Size: M18 (brass), single distance, non shield type.
Detection range: 10mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to pricce ratio E3JK-TN14 2M.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thhe oil spray test was carried out on the condition of the work site E3JK-TN14 2M.
Simulation test was carried out in the environment of high oil mist concentration.
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-TP13 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-TP14 2M
Related download