Home
>> Products
>> OMRON
>> Sensor
>> rotary encoder
>> incremental encoder
>> E6HZ-CWZ6C Incremental rotary encoder diameter 38
E6HZ-CWZ6C Incremental rotary encoder diameter 38
OMRON E6HZ-CWZ6C Manual And Instructions
E6HZ-CWZ6C INSTRUCTION sheet
OMRON E6HZ-CWZ6C Product information and technical parameters：
Brand: OMRON
Name: Incremental rotary encoder diameter 38
Model: E6HZ-CWZ6C
A small, high resolution general type of hollow shaft with no need for coupling.
Incremental diameter (38 hollow shaft).
With 8 shaft hole.
Corresponding supply voltage DC5 ~ 24V (open collector output type).
Outer diameter of 38, with high resolution 3600P/R.
Power supply voltage: DC5 ~ 24V.
Output form: open collector output (NPN output).
...More relevant models >>>>
E6HZ-CWZ6C INSTRUCTION sheet
OMRON E6HZ-CWZ6C Product information and technical parameters：
Brand: OMRON
Name: Incremental rotary encoder diameter 38
Model: E6HZ-CWZ6C
A small, high resolution general type of hollow shaft with no need for coupling.
Incremental diameter (38 hollow shaft).
With 8 shaft hole.
Corresponding supply voltage DC5 ~ 24V (open collector output type).
Outer diameter of 38, with high resolution 3600P/R.
Power supply voltage: DC5 ~ 24V.
Output form: open collector output (NPN output).
Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, --; Material, --; Count, --.
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. Size: M12 (Brass); Single; Shielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): M12 Connector E6HZ-CWZ6C.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications E6HZ-CWZ6C Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 25 mm.
No. of opti- cal axes: 1.
Model: PNP output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes E6HZ-CWZ6C.
Models are available with M8 pre-wired connectors. Appearance: Unshielded, 25 × 25.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
A Wealth of Models for All Types of.
Applications.
Easy installation, high-speed pulse generator, high-speed,
rotation control, and more.
Direct mounted to metal (-N Models).
A wealth of models ideal for limit control, counting control,
and other applications (-N Models) E6HZ-CWZ6C. E3JM-10M4T detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Function: timer,
Output: relay.
2 types of cost reductionPressure range: Positive pressure; 0 to 100 kPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products E6HZ-CWZ6C.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting methhod (See note 1 E6HZ-CWZ6C. ): M8 Connector (3-pin).
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.
Count: 1.
Accessories: Description, --; Material, --; Count, --.
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. Size: M12 (Brass); Single; Shielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): M12 Connector E6HZ-CWZ6C.
Body length: Short.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications E6HZ-CWZ6C Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 25 mm.
No. of opti- cal axes: 1.
Model: PNP output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are available with one or two light axes E6HZ-CWZ6C.
Models are available with M8 pre-wired connectors. Appearance: Unshielded, 25 × 25.
Sensing distance: 5 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
A Wealth of Models for All Types of.
Applications.
Easy installation, high-speed pulse generator, high-speed,
rotation control, and more.
Direct mounted to metal (-N Models).
A wealth of models ideal for limit control, counting control,
and other applications (-N Models) E6HZ-CWZ6C. E3JM-10M4T detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m.
Output status: ON into the light; light shading ON; switch conversion type.
Function: timer,
Output: relay.
2 types of cost reductionPressure range: Positive pressure; 0 to 100 kPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products E6HZ-CWZ6C.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting methhod (See note 1 E6HZ-CWZ6C. ): M8 Connector (3-pin).
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.
...More relevant models >>>>
Last one: OMRON Incremental rotary encoder diameter 38 E6HZ-C Series
next one: OMRON Incremental rotary encoder diameter 38 E6HZ-CWZ1X
Related download