E8F2-B10C Digital Pressure Sensor
OMRON E8F2-B10C Manual And Instructions
E8F2-B10C datasheetPDF datasheet
E8F2-B10C INSTRUCTION sheet
OMRON E8F2-B10C Product information and technical parameters：
Brand: OMRON
Name: Digital Pressure Sensor
Model: E8F2-B10C
Pressure range: Positive pressure; 0 to 1 MPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode.
...More relevant models >>>>
E8F2-B10C datasheetPDF datasheet
E8F2-B10C INSTRUCTION sheet
OMRON E8F2-B10C Product information and technical parameters：
Brand: OMRON
Name: Digital Pressure Sensor
Model: E8F2-B10C
Pressure range: Positive pressure; 0 to 1 MPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode.
Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 49 (61).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 E8F2-B10C. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated E8F2-B10C
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor E8F2-B10C.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance E8F2-B10C.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Field of view: Wide View (Short-distance).
Number of pixels: 760,000 pixels.
Color: PNP.
Field of view/Installation distance: Refer to figure 8 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found inn high-end models without the,
need as in vision system for a separate controller E8F2-B10C.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. E32-D51 type: environment resistant; heat resistant,
Specialty:: heat resistant: 150,
Bending radius (mm): R35 E8F2-B10C.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
Sensing distance: 4.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 49 (61).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 E8F2-B10C. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated E8F2-B10C
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 5 m.
Output configu ration: NPN.
Long-distance Photoelectric Sensor E8F2-B10C.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance E8F2-B10C.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Field of view: Wide View (Short-distance).
Number of pixels: 760,000 pixels.
Color: PNP.
Field of view/Installation distance: Refer to figure 8 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found inn high-end models without the,
need as in vision system for a separate controller E8F2-B10C.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. E32-D51 type: environment resistant; heat resistant,
Specialty:: heat resistant: 150,
Bending radius (mm): R35 E8F2-B10C.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needs
...More relevant models >>>>
Last one: 
next one: Related download