G2RV-SR700-AP AC/DC24 Slim I/O Relay

OMRON Slim I/O RelayG2RV-SR700-AP AC/DC24

G2RV-SR700-AP AC/DC24 Introduce | Catalog / Manual / Instructions / Software download

OMRON G2RV-SR700-AP AC/DC24 Manual And Instructions
G2RV-SR700-AP AC/DC24 datasheetPDF datasheet
G2RV-SR700-AP AC/DC24 datasheetPDF datasheet
G2RV-SR700-AP AC/DC24 datasheetPDF datasheet

OMRON G2RV-SR700-AP AC/DC24 Product information and technical parameters：
Brand: OMRON
Name: Slim I/O Relay
Model: G2RV-SR700-AP AC/DC24
Terminal (Wire connection): Screw terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.

Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 30 A at 200 to 480 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track G2RV-SR700-AP AC/DC24.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2 G2RV-SR700-AP AC/DC24)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation). Name: Multi-channel Power Controller.
Number of control channels: 4 G2RV-SR700-AP AC/DC24.
Heater burnout detection: Supported.
Load power supply voltage: 100 to 240 VAC.
Optimum Cycle Control for High-precision.
Control with Low Noise.
Smaller than a Normal Power Controller.
Enables low-noise power control in combination with zero-cross.
SSRs. (See note.).
One Controller can control up to 8 SSRs.
RS-485 communications to set manipulated variables and,
heater burnout detection G2RV-SR700-AP AC/DC24. The Smart FB Library for the G3ZA,
can also be used.
CE Marking.
Main Upgraded Functions.
Soft-start function added for lamp heaters.
Three-phase optimum cycle control added for three-phase heaters.
Combining with special CT for150-A current detection.
Note: The G3ZA must be used in combination with an SSR without the,
zero cross function when the soft-start function is used. Number of elements: 3.
Insulation method: Photocoupler.
Rated supply voltage: 100 to 240 VAC.
Applicable motor: 0.75 kW (4.8 A), 200 to 220 VAC.
Sollid State Contactors That Can Drive 3-phase Motors Frequently,
and Achieve Harmonized Protection with Thermal G2RV-SR700-AP AC/DC24.
Overload Relays.
Certified for UL and CSA.
Mount with screws or to DIN tracks.
Compact monoblock construction ((W: 80 × H: 100 × D: 100 mm) G2RV-SR700-AP AC/DC24.
with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.
Two-element models added to series.

...More relevant models >>>>