OMRON
Home >> Products >> OMRON >> Relay >> Solid-state relay >> Solid state relay for heater >> G3NE-210TL Solid State Relays

G3NE-210TL Solid State Relays

OMRON G3NE-210TL Manual And Instructions
G3NE-210TL datasheetPDF datasheet

OMRON G3NE-210TL Product information and technical parameters:
Brand: OMRON
Name: Solid State Relays
Model: G3NE-210TL
Isolation: Phototriac.
Zero cross function: No.
Indicator: No.
Rated output load: 10 A at 100 to 240 VAC.
Rated input voltage(See note 1, 2.): 5VDC, 12VDC, 24VDC.
Compact, Low-cost, SSR Switching 5 to 20 A.
Wide load voltage range: 75 to 264 VAC. Both 100-V and,
200-V loads can be handled with the same model.
Dedicated, compact aluminum PCB and power elements used.
Built-in varistor effectively absorbs external surges.
Quick-connect #110 input terminals and #250 output,
connections. (#187 input terminals and #250 output,
connections are available.).
“-US” models certified by UL, CSA, and IEC/EN (TÜV).

Type: DC-switching.
Contact form: 3PDT.
Open structure: Solder terminals.
Stable Contact Reliability and Long Life.
Easy to mount, wire, and use.
A large selection of models including various contact forms,
DC-switching models, and open models.
Mechanical life: 5,000,000 operations; electrical life,
(under rated load): 500,000 operations G3NE-210TL.
Models also available with built-in diodes and for use as,
auxiliary power relays G3NE-210TL Ontology: insert terminal type (UL standard certification type).
Pole number: 4 pole.
G2A type plastic sealing type.
Because it is sealed structure, so even in the dust environment, etc..
Can also play a more stable performance than the lock type.
Parts of the relay mechanism are annealed,
Reduce the generation of internal gas G3NE-210TL.
Compared with the metal sealed relay, the price is cheaperTerminal (Wire connection): Screw terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: AC, 110V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel G3NE-210TL.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Number of elements: 3.
Insulation method: Phototriac.
Rated supply voltage: 12 to 24 VDC.
Input method: No-voltage input (open and short circuit input).
Applicable motor: 2.2 kW (5.5 A), 380 to 400 VAC.
Soft-start Function Starts Motors Smootthly,
and Economically G3NE-210TL.
The soft-start function allows a smooth startup of motors by,
holding down the starting current, and functions like an inverter.
Comply with UL, CSA, IEC, and JEM requirements.
Mount with screws or to DIN traccks G3NE-210TL.
Compact monoblock construction (W: 80 × H: 100 × D: 100 mm).
with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.


...More relevant models >>>>